Publikationen
2024
Experimental Assessment of the Effect of Print Orientation on the Geometrical Accuracy of Microfeatures in Multi-Material 3D Inkjet Printing
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2024. Proceedings of WCMNM 2024
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2024. Proceedings of WCMNM 2024
Experimental Assessment of the Effect of Print Orientation on the Geometrical Accuracy of Microfeatures in Multi-Material 3D Inkjet Printing
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2024, September 19. 7th World Congress on Micro and Nano Manufacturing (WCMNM 2024), Pattaya, Thailand, 16.–19. September 2024
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2024, September 19. 7th World Congress on Micro and Nano Manufacturing (WCMNM 2024), Pattaya, Thailand, 16.–19. September 2024
Exploring the printability and marine degradation of biodegradable, starch-based polymers in additive manufacturing
Müller, T.; Elkaseer, A.; Stärk, S. von; Scholz, S.
2024, September 19. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024
Müller, T.; Elkaseer, A.; Stärk, S. von; Scholz, S.
2024, September 19. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024
SME Ready for the Future: fostering transformation and sustainable business models for manufacturing SMEs in Industry 4.0
Helman, J.; Rosienkiewicz, M.; Cholewa, M.; Molasy, M.; Scholz, S.; Müller, T.; Berselli, G.; Manara, F.; Cosic Pilepic, A.; Tikel, S.; Enyingi-Kurucz, A.
2024, September 19. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024
Helman, J.; Rosienkiewicz, M.; Cholewa, M.; Molasy, M.; Scholz, S.; Müller, T.; Berselli, G.; Manara, F.; Cosic Pilepic, A.; Tikel, S.; Enyingi-Kurucz, A.
2024, September 19. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024
3D model design rules for precise microfeature representation in 3D inkjet printing data
Chen, K. J.; ElKaseer, A.; Scholz, S. G.
2024, September 18. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024
Chen, K. J.; ElKaseer, A.; Scholz, S. G.
2024, September 18. 11th International Conference on Sustainable Design and Manufacturing (KES-SDM 2024), Santa Cruz (Madeira), Portugal, 18.–20. September 2024
On the correlation between pre-processing workflow and dimensional accuracy of 3D printed parts in high-precision Material Jetting
Chen, K. J.; Elkaseer, A.; Scholz, S. G.; Hagenmeyer, V.
2024. Additive Manufacturing, 91, Art.-Nr.: 104335. doi:10.1016/j.addma.2024.104335
Chen, K. J.; Elkaseer, A.; Scholz, S. G.; Hagenmeyer, V.
2024. Additive Manufacturing, 91, Art.-Nr.: 104335. doi:10.1016/j.addma.2024.104335
Detection of COVID-19 in Chest X-Ray Images Using a CNN Model toward Medical Applications
Mohsen, S.; Scholz, S. G.; Elkaseer, A.
2024. Wireless Personal Communications, 137 (1), 69–87. doi:10.1007/s11277-024-11309-7
Mohsen, S.; Scholz, S. G.; Elkaseer, A.
2024. Wireless Personal Communications, 137 (1), 69–87. doi:10.1007/s11277-024-11309-7
2023
On the quantitative assessment of the effect of multiple process parameters on the printed layer height in 3D inkjet printing
Elkaseer, A.; Chen, K. J.; Kuchta, M.; Scholz, S. G.
2023. Virtual and Physical Prototyping, 18 (1), Art.-Nr.: e2269898. doi:10.1080/17452759.2023.2269898
Elkaseer, A.; Chen, K. J.; Kuchta, M.; Scholz, S. G.
2023. Virtual and Physical Prototyping, 18 (1), Art.-Nr.: e2269898. doi:10.1080/17452759.2023.2269898
On the Development of a Reconfigurable Platform for the Control of Multiple Collaborative Robots from a Software Engineering Perspective
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, November 2. Future Technologies Conference (FTC 2023), San Francisco, CA, USA, 2.–3. November 2023
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, November 2. Future Technologies Conference (FTC 2023), San Francisco, CA, USA, 2.–3. November 2023
A study on the effect of process parameters on feature resolution in 3D inkjet printing
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2023, September 21. World Congress on Micro and Nano Manufacturing (WCMNM 2023), Evanston, IL, USA, 18.–21. September 2023
Chen, K. J.; Elkaseer, A.; Scholz, S. G.
2023, September 21. World Congress on Micro and Nano Manufacturing (WCMNM 2023), Evanston, IL, USA, 18.–21. September 2023
Intelligent Collaborative Robots Augmented with Vision Perception for Flexible Manufacturing System
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, September 18. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italien, 18.–20. September 2023
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023, September 18. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italien, 18.–20. September 2023
A study on the effect of process parameters on feature resolution in 3D inkjet printing
Chen, K. J.-Y.
2023. WCMNM 2023 Proceedings, World Congress on Micro and Nano Manufacturing, Evanston, 18th - 21st September 2023
Chen, K. J.-Y.
2023. WCMNM 2023 Proceedings, World Congress on Micro and Nano Manufacturing, Evanston, 18th - 21st September 2023
On the Development of a Reconfigurable Platform for the Control of Multiple Collaborative Robots from a Software Engineering Perspective
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2023, Volume 1. Ed.: Kohei Arai, 74–91, Springer Nature Switzerland. doi:10.1007/978-3-031-47454-5_6
Salem, M.; Elkaseer, A.; Müller, T.; Scholz, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2023, Volume 1. Ed.: Kohei Arai, 74–91, Springer Nature Switzerland. doi:10.1007/978-3-031-47454-5_6
Additive manufacturing of pressure resistant vessels for underwater environmental monitoring – Investigation of printing parameters in fused filament fabrication
Mueller, T.; L’Hermitte, L.; Scholz, S.
2023. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italien, 18.–20. September 2023
Mueller, T.; L’Hermitte, L.; Scholz, S.
2023. 10th International Conference on Sustainable Design and Manufacturing / Sustainability in Energy and Buildings (SDM / SEB 2023), Bari, Italien, 18.–20. September 2023
Enhancing Agility and Reconfigurability in Production: A Database-Driven Infrastructure to Support Additive Manufacturing with Collaborative Robotics
Mueller, T.; Scholz, S.; Salem, M.; Hagenmeyer, V.; Schmidt, A.
2023. Production Processes and Product Evolution in the Age of Disruption – Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023, 255 – 263, Springer International Publishing. doi:10.1007/978-3-031-34821-1_28
Mueller, T.; Scholz, S.; Salem, M.; Hagenmeyer, V.; Schmidt, A.
2023. Production Processes and Product Evolution in the Age of Disruption – Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023, 255 – 263, Springer International Publishing. doi:10.1007/978-3-031-34821-1_28
Brain Tumor Classification Using Hybrid Single Image Super-Resolution Technique with ResNext101_32x8d and VGG19 Pre-Trained Models
Mohsen, S.; Ali, A. M.; El-Rabaie, E.-S. M.; ElKaseer, A.; Scholz, S. G.; Hassan, A. M. A.
2023. IEEE Access, 11, 55582–55595. doi:10.1109/ACCESS.2023.3281529
Mohsen, S.; Ali, A. M.; El-Rabaie, E.-S. M.; ElKaseer, A.; Scholz, S. G.; Hassan, A. M. A.
2023. IEEE Access, 11, 55582–55595. doi:10.1109/ACCESS.2023.3281529
Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts
Mathew, A.; Kishore, S. R.; Tomy, A. T.; Sugavaneswaran, M.; Scholz, S. G.; Elkaseer, A.; Wilson, V. H.; John Rajan, A.
2023. Progress in Additive Manufacturing, 8, 1161–1178. doi:10.1007/s40964-022-00391-7
Mathew, A.; Kishore, S. R.; Tomy, A. T.; Sugavaneswaran, M.; Scholz, S. G.; Elkaseer, A.; Wilson, V. H.; John Rajan, A.
2023. Progress in Additive Manufacturing, 8, 1161–1178. doi:10.1007/s40964-022-00391-7
Simulation in Additive Manufacturing and Its Implications for Sustainable Manufacturing in the Era of Industry 4.0
Charles, A.; Bayat, M.; Elkaseer, A.; Scholz, S.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 370–377, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_36
Charles, A.; Bayat, M.; Elkaseer, A.; Scholz, S.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 370–377, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_36
Multi-parameter Analysis for High-Precision Inkjet Printing
Elkaseer, A.; Kuchta, M.; Rees, A.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 378–387, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_37
Elkaseer, A.; Kuchta, M.; Rees, A.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 378–387, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_37
Introduction and Evaluation of a Project Management Software Tool in the Context of the Administration of Science and Research Projects
Lauth, E.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 11–20, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_2
Lauth, E.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 11–20, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_2
Impact of Additive Manufacturing on Supply Chains
Lauth, E.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 1–10, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_1
Lauth, E.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 1–10, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_1
Digital, Scalable Manufacturing - A Sustainable Production Scenario Using Collaborative Robotics and Additive Manufacturing
Müller, T.; Schmidt, A.; Scholz, S.; Hagenmeyer, V.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 262–271, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_25
Müller, T.; Schmidt, A.; Scholz, S.; Hagenmeyer, V.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Ed.: S. Scholz, 262–271, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_25
Development of a Database for the Management and Use of Available Resources in the Field of Sustainable Nanomanufacturing
Marquardt, C.; Scholz, S. G.; Nau, K.; Schmidt, A.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing, SDM 2022, 14th - 16th September 2022. Ed.: S. Scholz, 232–241, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_22
Marquardt, C.; Scholz, S. G.; Nau, K.; Schmidt, A.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing, SDM 2022, 14th - 16th September 2022. Ed.: S. Scholz, 232–241, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_22
An Approach for Sustainable Knowledge Management and Policy Upstreaming for Industry4.0 in Central Europe
Marquardt, C.; Charles, A. P.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing, SDM 2022, 14th - 16th September 2022. Ed.: S. Scholz, 242–251, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_23
Marquardt, C.; Charles, A. P.; Scholz, S. G.
2023. Sustainable Design and Manufacturing – Proceedings of the 9th International Conference on Sustainable Design and Manufacturing, SDM 2022, 14th - 16th September 2022. Ed.: S. Scholz, 242–251, Springer Nature Singapore. doi:10.1007/978-981-19-9205-6_23
A Hybrid Learning-Driven Computer Vision Framework for Reverse Engineering via Enhanced 3D Shape Reconstruction
Salem, M.; Elkaseer, A.; Rees, A.; Scholz, S. G.
2023. Proceedings of the Future Technologies Conference (FTC) 2022, Volume 2, 848–861, Springer International Publishing. doi:10.1007/978-3-031-18458-1_58
Salem, M.; Elkaseer, A.; Rees, A.; Scholz, S. G.
2023. Proceedings of the Future Technologies Conference (FTC) 2022, Volume 2, 848–861, Springer International Publishing. doi:10.1007/978-3-031-18458-1_58
Critical Assessment of Current State of the Art in Wearable Sensor Nodes with Energy Harvesting Systems for Healthcare Applications
Alattar, A. E.; Elkaseer, A.; Scholz, S.; Mohsen, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2022. Vol.: 3. Ed.: K. Arai, 398–412, Springer International Publishing. doi:10.1007/978-3-031-18344-7_27
Alattar, A. E.; Elkaseer, A.; Scholz, S.; Mohsen, S.
2023. Proceedings of the Future Technologies Conference (FTC) 2022. Vol.: 3. Ed.: K. Arai, 398–412, Springer International Publishing. doi:10.1007/978-3-031-18344-7_27
2022
Material jetting for advanced applications: A state-of-the-art review, gaps and future directions
Elkaseer, A.; Chen, K. J.; Janhsen, J. C.; Refle, O.; Hagenmeyer, V.; Scholz, S. G.
2022. Additive Manufacturing, 60 (Part A), Art.-Nr.: 103270. doi:10.1016/j.addma.2022.103270
Elkaseer, A.; Chen, K. J.; Janhsen, J. C.; Refle, O.; Hagenmeyer, V.; Scholz, S. G.
2022. Additive Manufacturing, 60 (Part A), Art.-Nr.: 103270. doi:10.1016/j.addma.2022.103270
Gas-tight means zero defects - design considerations for thin-walled fluidic devices with overhangs by laser powder bed fusion
Grinschek, F.; Charles, A.; Elkaseer, A.; Klahn, C.; Scholz, S. G.; Dittmeyer, R.
2022. Materials & Design, 223, 111174. doi:10.1016/j.matdes.2022.111174
Grinschek, F.; Charles, A.; Elkaseer, A.; Klahn, C.; Scholz, S. G.; Dittmeyer, R.
2022. Materials & Design, 223, 111174. doi:10.1016/j.matdes.2022.111174
On the Assessment of the Effect of Multiple Process Parameters on the Precision of 3D Inkjet Printing
Elkaseer, A.; Kuchta, M.; Scholz, S. G.
2022. Proceedings of the World Congress on Micro and Nano Manufacturing, 19-22 September 2022, Leuven, Belgium. Ed.: S. Castagne, 126–131, Research Publishing. doi:10.3850/978-981-18-5180-3_RP26-0069
Elkaseer, A.; Kuchta, M.; Scholz, S. G.
2022. Proceedings of the World Congress on Micro and Nano Manufacturing, 19-22 September 2022, Leuven, Belgium. Ed.: S. Castagne, 126–131, Research Publishing. doi:10.3850/978-981-18-5180-3_RP26-0069
Digital, Scalable Manufacturing - A Sustainable Production Scenario Using Collaborative Robotics and Additive Manufacturing
Müller, T.; Schmidt, A.; Scholz, S.; Hagenmeyer, V.
2022, September 14. 9th International Conference on Sustainable Design and Manufacturing (KES SDM-22 2022), Split / Dalmatien, Kroatien, 14.–16. September 2022
Müller, T.; Schmidt, A.; Scholz, S.; Hagenmeyer, V.
2022, September 14. 9th International Conference on Sustainable Design and Manufacturing (KES SDM-22 2022), Split / Dalmatien, Kroatien, 14.–16. September 2022
Elucidation of dross formation in laser powder bed fusion at down-facing surfaces : Phenomenon-oriented multiphysics simulation and experimental validation
Charles, A.; Bayat, M.; Elkaseer, A.; Thijs, L.; Hattel, J. H.; Scholz, S.
2022. Additive manufacturing, 50, Article no: 102551. doi:10.1016/j.addma.2021.102551
Charles, A.; Bayat, M.; Elkaseer, A.; Thijs, L.; Hattel, J. H.; Scholz, S.
2022. Additive manufacturing, 50, Article no: 102551. doi:10.1016/j.addma.2021.102551
Non-Invasive Data Acquisition and IoT Solution for Human Vital Signs Monitoring: Applications, Limitations and Future Prospects
Salem, M.; Elkaseer, A.; El-Maddah, I. A. M.; Youssef, K. Y.; Scholz, S. G.; Mohamed, H. K.
2022. Sensors, 22 (17), Art.Nr. 6625. doi:10.3390/s22176625
Salem, M.; Elkaseer, A.; El-Maddah, I. A. M.; Youssef, K. Y.; Scholz, S. G.; Mohamed, H. K.
2022. Sensors, 22 (17), Art.Nr. 6625. doi:10.3390/s22176625
Effect of Process Parameters on the Performance of Drop-On-Demand 3D Inkjet Printing: Geometrical-Based Modeling and Experimental Validation
Elkaseer, A.; Schneider, S.; Deng, Y.; Scholz, S. G.
2022. Polymers, 14 (13), Art.-Nr.: 2557. doi:10.3390/polym14132557
Elkaseer, A.; Schneider, S.; Deng, Y.; Scholz, S. G.
2022. Polymers, 14 (13), Art.-Nr.: 2557. doi:10.3390/polym14132557
Part Tailoring in Metal-Additive Manufacturing: A Step towards Functionally Graded Customized Stainless-Steel Components Using Laser Powder Bed Fusion
Elkaseer, A.; Charles, A.; Schneider, S.; Scholz, S. G.
2022. Applied Sciences, 12 (12), Art.Nr. 6193. doi:10.3390/app12126193
Elkaseer, A.; Charles, A.; Schneider, S.; Scholz, S. G.
2022. Applied Sciences, 12 (12), Art.Nr. 6193. doi:10.3390/app12126193
Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
Solheid, J. S.; Elkaseer, A.; Wunsch, T.; Scholz, S.; Seifert, H. J.; Pfleging, W.
2022. Materials, 15 (9), Art.Nr. 3323. doi:10.3390/ma15093323
Solheid, J. S.; Elkaseer, A.; Wunsch, T.; Scholz, S.; Seifert, H. J.; Pfleging, W.
2022. Materials, 15 (9), Art.Nr. 3323. doi:10.3390/ma15093323
Features Detection-Based Computer Vision of Transparent 3D Inkjet Printed Parts
Elkaseer, A.; Scholz, A.; Scholz, S. G.
2022. Proceedings of the Future Technologies Conference (FTC) 2021, Volume 2. Ed.: K. Arai, 218–231, Springer International Publishing. doi:10.1007/978-3-030-89880-9_17
Elkaseer, A.; Scholz, A.; Scholz, S. G.
2022. Proceedings of the Future Technologies Conference (FTC) 2021, Volume 2. Ed.: K. Arai, 218–231, Springer International Publishing. doi:10.1007/978-3-030-89880-9_17
Sustainable Design and Manufacturing – Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021)
Scholz, S. G.; Howlett, R. J.; Setchi, R. (Hrsg.)
2022. Springer Singapur. doi:10.1007/978-981-16-6128-0
Scholz, S. G.; Howlett, R. J.; Setchi, R. (Hrsg.)
2022. Springer Singapur. doi:10.1007/978-981-16-6128-0
Development of Correction Factors for FDM 3D Printers: Experimental Investigation and ANN Modelling
Müller, T.; Elkaseer, A.; Wadlinger, J.; Salem, M.; Scholz, S. G.
2022. Sustainable Design and Manufacturing : Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. Scholz, 314–326, Springer Singapur. doi:10.1007/978-981-16-6128-0_30
Müller, T.; Elkaseer, A.; Wadlinger, J.; Salem, M.; Scholz, S. G.
2022. Sustainable Design and Manufacturing : Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. Scholz, 314–326, Springer Singapur. doi:10.1007/978-981-16-6128-0_30
Human Activity Recognition Using K-Nearest Neighbor Machine Learning Algorithm
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2022. Sustainable Design and Manufacturing – Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021). Ed.: S. Scholz, 304–313, Springer Singapur. doi:10.1007/978-981-16-6128-0_29
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2022. Sustainable Design and Manufacturing – Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021). Ed.: S. Scholz, 304–313, Springer Singapur. doi:10.1007/978-981-16-6128-0_29
Additive Manufacturing in the Automotive Industry and the Potential for Driving the Green and Electric Transition
Charles, A.; Hofer, A.; Elkaseer, A.; Scholz, S. G.
2022. Sustainable Design and Manufacturing: Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. G. Scholz, 339–346, Springer Singapur. doi:10.1007/978-981-16-6128-0_32
Charles, A.; Hofer, A.; Elkaseer, A.; Scholz, S. G.
2022. Sustainable Design and Manufacturing: Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021) . Ed.: S. G. Scholz, 339–346, Springer Singapur. doi:10.1007/978-981-16-6128-0_32
2021
Geometrical-based Simulation of Drop-on-Demand 3D Inkjet Printing
Elkaseer, A.; Schneider, S.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021: bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India
Elkaseer, A.; Schneider, S.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021: bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India
Effect of build platform location and part orientation on dimensional accuracy of downfacing surfaces in LPBF
Charles, A.; Elkaseer, A.; Thijs, L.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021, Bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India, Taylor and Francis
Charles, A.; Elkaseer, A.; Thijs, L.; Scholz, S.
2021. Proceedings of the World Congress on Micro and Nano Manufacturing 2021, Bringing together the worldwide community of micro- & nano-manufacturing experts, 20-23 September 2021, IIT Bombay, Mumbai, India, Taylor and Francis
Down-facing surfaces in laser powder bed fusion of Ti6Al4V: Effect of dross formation on dimensional accuracy and surface texture
Charles, A. P.; Elkaseer, A.; Paggi, U.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2021. Additive manufacturing, 46, Article: 102148. doi:10.1016/j.addma.2021.102148
Charles, A. P.; Elkaseer, A.; Paggi, U.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2021. Additive manufacturing, 46, Article: 102148. doi:10.1016/j.addma.2021.102148
Introduction of the technical diving method for scientific diving to investigate biocoenosis in the twilight zone of freshwater lakes
Brümmer, F.; Remmers, D.; Müller, R.-W.; Scholz, S.
2021. 6th European Conference on Scientific Diving - TU Bergakademie Freiberg
Brümmer, F.; Remmers, D.; Müller, R.-W.; Scholz, S.
2021. 6th European Conference on Scientific Diving - TU Bergakademie Freiberg
One aspect of 3D printing during the COVID-19 Pandemic
Müller, T.; Charles, A. P.; Scholz, S.
2021, März 23. Re-Imagining the Futures of 3D Printing in Society - Scientific symposium and expert scenario workshop (2021), Online, 23.–24. März 2021
Müller, T.; Charles, A. P.; Scholz, S.
2021, März 23. Re-Imagining the Futures of 3D Printing in Society - Scientific symposium and expert scenario workshop (2021), Online, 23.–24. März 2021
Wertstromkinematik – Produktionssysteme neu gedacht: Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 2)
Kimmig, A.; Schöck, M.; Mühlbeier, E.; Oexle, F.; Fleischer, J.; Bönsch, J.; Ovtcharova, J.; Hahn, J.; Grunwald, A.; Albers, A.; Rapp, S.; Hagenmeyer, V.; Scholz, S. G.; Schmidt, A.; Müller, T.; Becker, J.; Schade, F.; Beyerer, J.; Rehak, J.; Zwick, T.; Pauli, M.; Nuß, B.; Lanza, G.; Schild, L.; Overbeck, L.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (12), 935–939. doi:10.1515/zwf-2021-0207
Kimmig, A.; Schöck, M.; Mühlbeier, E.; Oexle, F.; Fleischer, J.; Bönsch, J.; Ovtcharova, J.; Hahn, J.; Grunwald, A.; Albers, A.; Rapp, S.; Hagenmeyer, V.; Scholz, S. G.; Schmidt, A.; Müller, T.; Becker, J.; Schade, F.; Beyerer, J.; Rehak, J.; Zwick, T.; Pauli, M.; Nuß, B.; Lanza, G.; Schild, L.; Overbeck, L.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (12), 935–939. doi:10.1515/zwf-2021-0207
Sustainable Design and Manufacturing 2020 - Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020)
Scholz, S. G.; Howlett, R. J.; Setchi, R. (Hrsg.)
2021. Springer Singapur. doi:10.1007/978-981-15-8131-1
Scholz, S. G.; Howlett, R. J.; Setchi, R. (Hrsg.)
2021. Springer Singapur. doi:10.1007/978-981-15-8131-1
Industry 4.0-Oriented Deep Learning Models for Human Activity Recognition
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2021. IEEE Access, 9, 150508–150521. doi:10.1109/ACCESS.2021.3125733
Mohsen, S.; Elkaseer, A.; Scholz, S. G.
2021. IEEE Access, 9, 150508–150521. doi:10.1109/ACCESS.2021.3125733
Introduction of the technical diving method for scientific diving to investigate biocoenosis in the twilight zone of freshwater lakes
Brümmer, F.; Remmers, D.; Müller, R.-W.; Scholz, S.
2021. Freiberg online geoscience, 58, 46–53
Brümmer, F.; Remmers, D.; Müller, R.-W.; Scholz, S.
2021. Freiberg online geoscience, 58, 46–53
Additive Manufacturing: Comparative Study of an IoT Integrated Approach and a Conventional Solution
Shandilya, H.; Kuchta, M.; Elkaseer, A.; Müller, T.; Scholz, S. G.
2021. Proceedings of the Future Technologies Conference (FTC) 2020, Volume 2. Ed.: K. Arai, 976–986, Springer International Publishing. doi:10.1007/978-3-030-63089-8_64
Shandilya, H.; Kuchta, M.; Elkaseer, A.; Müller, T.; Scholz, S. G.
2021. Proceedings of the Future Technologies Conference (FTC) 2020, Volume 2. Ed.: K. Arai, 976–986, Springer International Publishing. doi:10.1007/978-3-030-63089-8_64
Heterogeneous Dual-Frequency IoT Network for Vital Data Acquisition
Salem, M.; El-Maddah, I.; Youssef, K.; Elkaseer, A.; Scholz, S.; Mohamed, H.
2021. Sustainable Design and Manufacturing 2020. Ed.: S. Scholz, 333–343, Springer Nature. doi:10.1007/978-981-15-8131-1_30
Salem, M.; El-Maddah, I.; Youssef, K.; Elkaseer, A.; Scholz, S.; Mohamed, H.
2021. Sustainable Design and Manufacturing 2020. Ed.: S. Scholz, 333–343, Springer Nature. doi:10.1007/978-981-15-8131-1_30
2020
Practical Implementation of Industry 4.0: Human involvement in modern production processes = Praktische Umsetzung des Industrie 4.0-Konzepts: Die Rolle des Menschen in modernen Produktionsprozessen
Scholz, S. G.
2020, Oktober 14. Mensch Maschine Produktion, MMP-Symposium (2020), Online, 14. Oktober 2020
Scholz, S. G.
2020, Oktober 14. Mensch Maschine Produktion, MMP-Symposium (2020), Online, 14. Oktober 2020
Code Generation for Database Developers
Schmidt, A.; Scholz, S.
2020, September. 12th International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2020), Online, 27. September 2020
Schmidt, A.; Scholz, S.
2020, September. 12th International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2020), Online, 27. September 2020
Development of Precision Additive Manufacturing Processes
Elkaseer, A.; Charles, A. P.; Scholz, S. G.
2020. Precision additive metal manufacturing. Ed.: R. Leach, 35–68, CRC Press. doi:10.1201/9780429436543-3
Elkaseer, A.; Charles, A. P.; Scholz, S. G.
2020. Precision additive metal manufacturing. Ed.: R. Leach, 35–68, CRC Press. doi:10.1201/9780429436543-3
In-Process Digital Monitoring of Additive Manufacturing: Proposed Machine Learning Approach and Potential Implications on Sustainability
Charles, A. P.; Salem, M.; Moshiri, M.; Elkaseer, A.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 297–306, Springer. doi:10.1007/978-981-15-8131-1_27
Charles, A. P.; Salem, M.; Moshiri, M.; Elkaseer, A.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 297–306, Springer. doi:10.1007/978-981-15-8131-1_27
Impact of Nonplanar 3D Printing on Surface Roughness and Build Time in Fused Filament Fabrication
Elkaseer, A.; Müller, T.; Rabsch, D.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 285–295, Springer. doi:10.1007/978-981-15-8131-1_26
Elkaseer, A.; Müller, T.; Rabsch, D.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020), 9-11 September 2020. Ed.: S. Scholz, 285–295, Springer. doi:10.1007/978-981-15-8131-1_26
An Industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system
Moshiri, M.; Charles, A. P.; Elkaseer, A.; Scholz, S.; Mohanty, S.; Tosello, G.
2020. Procedia CIRP, 93, 32–37. doi:10.1016/j.procir.2020.04.151
Moshiri, M.; Charles, A. P.; Elkaseer, A.; Scholz, S.; Mohanty, S.; Tosello, G.
2020. Procedia CIRP, 93, 32–37. doi:10.1016/j.procir.2020.04.151
Stakeholder-Driven Conceptualization of Open Innovation Approaches in the SYNERGY Project
Fauth, J.; Marquardt, C.; Di Bari, G.; Raule, N.; Ronco, J. L.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020). Ed.: S. Scholz, 307–317, Springer. doi:10.1007/978-981-15-8131-1_28
Fauth, J.; Marquardt, C.; Di Bari, G.; Raule, N.; Ronco, J. L.; Scholz, S. G.
2020. Sustainable Design and Manufacturing 2020 – Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020). Ed.: S. Scholz, 307–317, Springer. doi:10.1007/978-981-15-8131-1_28
Eight Weeks Later - The Unprecedented Rise of 3D Printing during the COVID-19 Pandemic : a Case Study, Lessons Learned, and Implications on the Future of Global Decentralized Manufacturing
Mueller, T.; Elkaseer, A.; Charles, A. P.; Fauth, J.; Rabsch, D.; Scholz, A.; Marquardt, C.; Nau, K.; Scholz, S. G.
2020. Applied Sciences, 10 (12), 4135. doi:10.3390/app10124135
Mueller, T.; Elkaseer, A.; Charles, A. P.; Fauth, J.; Rabsch, D.; Scholz, A.; Marquardt, C.; Nau, K.; Scholz, S. G.
2020. Applied Sciences, 10 (12), 4135. doi:10.3390/app10124135
Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing
Elkaseer, A.; Schneider, S.; Scholz, S. G.
2020. Applied Sciences, 10 (8), Article: 2899. doi:10.3390/app10082899
Elkaseer, A.; Schneider, S.; Scholz, S. G.
2020. Applied Sciences, 10 (8), Article: 2899. doi:10.3390/app10082899
Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V
Charles, A. P.; Elkaseer, A.; Thijs, L.; Scholz, S. G.
2020. Applied Sciences, 10 (7), Article: 2416. doi:10.3390/app10072416
Charles, A. P.; Elkaseer, A.; Thijs, L.; Scholz, S. G.
2020. Applied Sciences, 10 (7), Article: 2416. doi:10.3390/app10072416
Advances in microcellular injection moulding
Llewelyn, G.; Rees, A.; Griffiths, C. A.; Scholz, S. G.
2020. Journal of cellular plastics, 56 (6), 646–674. doi:10.1177/0021955X20912207
Llewelyn, G.; Rees, A.; Griffiths, C. A.; Scholz, S. G.
2020. Journal of cellular plastics, 56 (6), 646–674. doi:10.1177/0021955X20912207
Software Toolkit for Visualization and Process Selection for Modular Scalable Manufacturing of 3D Micro-Devices
Scholz, S.; Elkaseer, A.; Salem, M.; Hagenmeyer, V.
2020. Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. Ed.: L. Borzemski, 160–172, Springer International Publishing. doi:10.1007/978-3-030-30440-9_16
Scholz, S.; Elkaseer, A.; Salem, M.; Hagenmeyer, V.
2020. Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. Ed.: L. Borzemski, 160–172, Springer International Publishing. doi:10.1007/978-3-030-30440-9_16
2019
3D Printing Technologies in KNMF
Mueller, T.; Elkaseer, A.; Scholz, S.
2019, Oktober 24. International Symposium on Thermal Effects in Gas Flows in Microscale (ISTEGIM 2019), Ettlingen, Deutschland, 24.–25. Oktober 2019
Mueller, T.; Elkaseer, A.; Scholz, S.
2019, Oktober 24. International Symposium on Thermal Effects in Gas Flows in Microscale (ISTEGIM 2019), Ettlingen, Deutschland, 24.–25. Oktober 2019
Safe by Design in3D printing
Nau, K.; Scholz, S.
2019, Juli 4. 6th International Conference on Sustainable Design and Manufacturing (SDM 2019), Budapest, Ungarn, 4.–5. Juli 2019
Nau, K.; Scholz, S.
2019, Juli 4. 6th International Conference on Sustainable Design and Manufacturing (SDM 2019), Budapest, Ungarn, 4.–5. Juli 2019
Context-aware Visualization of Entity-Entity Relationships in a Document Corpus
Schmidt, A.; Kief, P.; Scholz, S.
2019, Januar 29. 30th Australasian Database Conference (ADC 2019), Sydney, Australien, 29. Januar–1. Februar 2019
Schmidt, A.; Kief, P.; Scholz, S.
2019, Januar 29. 30th Australasian Database Conference (ADC 2019), Sydney, Australien, 29. Januar–1. Februar 2019
Context-Aware Visualization of Entity-Entity Relationships in a Document Corpus
Schmidt, A.; Kief, P.; Scholz, S.
2019. Databases Theory and Applications : 30th Australasian Database Conference, ADC 2019, Sydney, AUS, January 29 – February 1, 2019, Proceedings. Ed.: L. Chang, 135–138, Springer. doi:10.1007/978-3-030-12079-5_10
Schmidt, A.; Kief, P.; Scholz, S.
2019. Databases Theory and Applications : 30th Australasian Database Conference, ADC 2019, Sydney, AUS, January 29 – February 1, 2019, Proceedings. Ed.: L. Chang, 135–138, Springer. doi:10.1007/978-3-030-12079-5_10
Vision system-based inspection and alignment of laminated polymer films for 3D-Integration of microsystems
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. IFAC-PapersOnLine, 52 (15), 13–18. doi:10.1016/j.ifacol.2019.11.642
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. IFAC-PapersOnLine, 52 (15), 13–18. doi:10.1016/j.ifacol.2019.11.642
ANN-based modelling of dimensional accuracy in L-PBF
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S. G.
2019. Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Ed.: A. Bernard, Ecole Centrale de Nantes
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S. G.
2019. Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019). Ed.: A. Bernard, Ecole Centrale de Nantes
ANN based prediction of dimensional error in down-facing surfaces for laser powder bed fusion parts
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S.
2019. ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing (2019), Nantes, Frankreich, 16.–18. September 2019
Charles, A. P.; Elkaseer, A.; Salem, M.; Thijs, L.; Scholz, S.
2019. ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing (2019), Nantes, Frankreich, 16.–18. September 2019
Total Cost of Ownership for different state of the art FDM Machines
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Sustainable Design and Manufacturing 2019 : Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19) - Budapest, Hungary, 4 - 5 July 2019. Ed.: P. Ball, 351–361, Springer
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Sustainable Design and Manufacturing 2019 : Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19) - Budapest, Hungary, 4 - 5 July 2019. Ed.: P. Ball, 351–361, Springer
Automated Extraction of Domain-Specific Information from Scientific Publications
Kief, P.; Marquardt, C.; Nau, K.; Scholz, S.; Schmidt, A.
2019. 8th International Conference on Data Analytics, Porto, P, September 22-26, 2019
Kief, P.; Marquardt, C.; Nau, K.; Scholz, S.; Schmidt, A.
2019. 8th International Conference on Data Analytics, Porto, P, September 22-26, 2019
Automated Extraction of Domain-Specific Information from Scientific Publications
Kief, P.; Marquardt, C.; Nau, K.; Scholz, S.; Schmidt, A.
2019. 8th International Conference on Data Analytics (Data Analytics 2019), Porto, Portugal, 22.–26. September 2019
Kief, P.; Marquardt, C.; Nau, K.; Scholz, S.; Schmidt, A.
2019. 8th International Conference on Data Analytics (Data Analytics 2019), Porto, Portugal, 22.–26. September 2019
Vision system-based inspection and alignment of laminated polymer films for 3D-integration of microsystems
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. 8th / 11th IFAC Symposium on Mechatronic Systems and IFAC Symposium on Nonlinear Control Systems (MECHATRONICS / NOLCOS 2019), Wien, Österreich, 4.–6. September 2019
Elkaseer, A.; Salem, M.; Hagenmeyer, V.; Scholz, S.
2019. 8th / 11th IFAC Symposium on Mechatronic Systems and IFAC Symposium on Nonlinear Control Systems (MECHATRONICS / NOLCOS 2019), Wien, Österreich, 4.–6. September 2019
Prediction of Dimensional Error in Down-Facing Surfaces for Laser Powder Bed Fusion Parts [in press]
Charles, A. P.; Elkaseer, A.; Hagenmeyer, V.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September
Charles, A. P.; Elkaseer, A.; Hagenmeyer, V.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September
FDM Process Optimisation for Low Surface Roughness and Energy Consumption
Elkaseer, A.; Schneider, S.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September
Elkaseer, A.; Schneider, S.; Scholz, S.
2019. 3RD World Congress on Micro and Nano Manufacturing, Raleigh WCMNM 2019, North Carolina, USA, 10th - 12th September
On the Assessment of Thermo-mechanical Degradability of Multi-recycled ABS Polymer for 3D Printing Applications
Charles, A. P.; Bassan, P. M.; Mueller, T.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 363–373, Springer. doi:10.1007/978-981-13-9271-9_30
Charles, A. P.; Bassan, P. M.; Mueller, T.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 363–373, Springer. doi:10.1007/978-981-13-9271-9_30
Safe by Design in 3D printing
Nau, K.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 341–350, Springer. doi:10.1007/978-981-13-9271-9_28
Nau, K.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 341–350, Springer. doi:10.1007/978-981-13-9271-9_28
Total Cost of Ownership for Different State of the Art FDM Machines (3D Printers)
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 351–361, Springer. doi:10.1007/978-981-13-9271-9_29
Fauth, J.; Elkaseer, A.; Scholz, S. G.
2019. Proceedings of the 6th International Conference on Sustainable Design and Manufacturing (KES-SDM 19), Budapest, Ungarn, 4 - 5 Juli 2019. Ed.: P. Ball, 351–361, Springer. doi:10.1007/978-981-13-9271-9_29
Powerful data analysis and composition with the UNIX-shell
Schmidt, A.; Scholz, S.
2019. Web Engineering: 19th International Conference on Web Engineering, ICWE 2019; Daejeon; South Korea; 11 June 2019 through 14 June 2019. Ed.: M. Bakaev, 582–585, Springer Nature. doi:10.1007/978-3-030-19274-7_49
Schmidt, A.; Scholz, S.
2019. Web Engineering: 19th International Conference on Web Engineering, ICWE 2019; Daejeon; South Korea; 11 June 2019 through 14 June 2019. Ed.: M. Bakaev, 582–585, Springer Nature. doi:10.1007/978-3-030-19274-7_49
Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2019. Applied Sciences, 9 (6), Article: 1256. doi:10.3390/app9061256
Charles, A. P.; Elkaseer, A.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2019. Applied Sciences, 9 (6), Article: 1256. doi:10.3390/app9061256
Advances in near net shape polymer manufacturing through microcellular injection moulding
Llewelyn, G.; Rees, A.; Griffiths, C. A.; Scholz, S. G.
2019. Near net shape manufacturing processes. Ed.: K. Gupta, 177–189, Springer International Publishing. doi:10.1007/978-3-030-10579-2_8
Llewelyn, G.; Rees, A.; Griffiths, C. A.; Scholz, S. G.
2019. Near net shape manufacturing processes. Ed.: K. Gupta, 177–189, Springer International Publishing. doi:10.1007/978-3-030-10579-2_8
Laser Ablation of Cobalt-Bound Tungsten Carbide and Aluminium Oxide Ceramic: Experimental Investigation with ANN Modelling and GA Optimisation
Elkaseer, A.; Lambarri, J.; Quintana, I.; Scholz, S.
2019. Sustainable Design and Manufacturing 2018 – Proceedings of the 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18). Ed.: D. Dao, 21–30, Springer International Publishing. doi:10.1007/978-3-030-04290-5_3
Elkaseer, A.; Lambarri, J.; Quintana, I.; Scholz, S.
2019. Sustainable Design and Manufacturing 2018 – Proceedings of the 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18). Ed.: D. Dao, 21–30, Springer International Publishing. doi:10.1007/978-3-030-04290-5_3
Industrial internet of things solution for real-time monitoring of the additive manufacturing process
Salama, M.; Elkaseer, A.; Saied, M.; Ali, H.; Scholz, S.
2019. Advances in Intelligent Systems and Computing, 852, 355–365. doi:10.1007/978-3-319-99981-4_33
Salama, M.; Elkaseer, A.; Saied, M.; Ali, H.; Scholz, S.
2019. Advances in Intelligent Systems and Computing, 852, 355–365. doi:10.1007/978-3-319-99981-4_33
2018
A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. 44th Euromicro Conference on Software Engineering and Advanced Applications (2018), Prag, Tschechien, 29.–31. August 2018
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. 44th Euromicro Conference on Software Engineering and Advanced Applications (2018), Prag, Tschechien, 29.–31. August 2018
Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018
Digital Detection and Correction of Errors in As-built Parts: a Step Towards Automated Quality Control of Additive Manufacturing
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing. Ed.: J. Valentincic, 389–392, Research Publishing. doi:10.3850/978-981-11-2728-1_58
Elkaseer, A.; Mueller, T.; Charles, A. P.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing. Ed.: J. Valentincic, 389–392, Research Publishing. doi:10.3850/978-981-11-2728-1_58
Interactive search and exploration of entity-entity relationships in a huge document corpus
Schmidt, A.; Scholz, S.
2018. 10th International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2018), Nizza, Frankreich, 20.–24. Mai 2018
Schmidt, A.; Scholz, S.
2018. 10th International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2018), Nizza, Frankreich, 20.–24. Mai 2018
Interactive search and exploration of entity-entity relationships in a huge document corpus
Schmidt, A.; Scholz, S.
2018. 10th International Conference on Advances in Databases, Knowledge, and Data Applications. Ed.: A. Schmidt, International Academy, Research, and Industry Association (IARIA)
Schmidt, A.; Scholz, S.
2018. 10th International Conference on Advances in Databases, Knowledge, and Data Applications. Ed.: A. Schmidt, International Academy, Research, and Industry Association (IARIA)
A knowledge-based decision support system for micro and nano manufacturing process chains
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. Euromicro Conference on Software Engineering and Advanced Applications 2018 (SEAA 2018), Prague, CZ, August 29-31, 2018. Ed.: T. Bures, 314–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SEAA.2018.00058
Müller, T.; Hagenmeyer, V.; Schmidt, A.; Scholz, S.; Elkaseer, A.
2018. Euromicro Conference on Software Engineering and Advanced Applications 2018 (SEAA 2018), Prague, CZ, August 29-31, 2018. Ed.: T. Bures, 314–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SEAA.2018.00058
Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, 22.–25. Juni 2018
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, 22.–25. Juni 2018
Effect of process parameters on dimensional accuracy of down-facing surfaces in selective laser melting of TI6AL4V
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, ASPE
Charles, A. P.; Elkaseer, A.; Mueller, T.; Thijs, L.; Hagenmeyer, V.; Scholz, S.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, ASPE
Precision additive metal manufacturing
Witvrouw, A.; Metelkova, J.; Ranjan, R.; Bayat, M.; De Baere, D.; Moshiri, M.; Tosello, G.; Solheid, J.; Charles, A. P.; Scholz, S.; Baier, M.; Carmignato, S.; Stavroulakis, P.; Shaheen, A.; Thijs, L.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, 18–23, ASPE
Witvrouw, A.; Metelkova, J.; Ranjan, R.; Bayat, M.; De Baere, D.; Moshiri, M.; Tosello, G.; Solheid, J.; Charles, A. P.; Scholz, S.; Baier, M.; Carmignato, S.; Stavroulakis, P.; Shaheen, A.; Thijs, L.
2018. Advancing Precision in Additive Manufacturing : 2018 ASPE and euspen Summer Topical Meeting, Berkeley, CA, Jube 22-25, 2018, 18–23, ASPE
Precision additive metal manufacturing
Witvrouw, A.; Metelkova, J.; Ranjan, R.; Bayat, M.; De Baere, D.; Moshiri, M.; Tosello, G.; Solheid, J.; Charles, A. P.; Scholz, S.; Baier, M.; Carmignato, S.; Stavroulakis, P.; Shaheen, A.; Thijs, L.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, 22.–25. Juni 2018
Witvrouw, A.; Metelkova, J.; Ranjan, R.; Bayat, M.; De Baere, D.; Moshiri, M.; Tosello, G.; Solheid, J.; Charles, A. P.; Scholz, S.; Baier, M.; Carmignato, S.; Stavroulakis, P.; Shaheen, A.; Thijs, L.
2018. Advancing Precision in Additive Manufacturing : ASPE and euspen Summer Topical Meeting (2018), Berkeley, CA, USA, 22.–25. Juni 2018
A Study of the Factors Influencing Generated Surface Roughness of Downfacing Surfaces in Selective Laser Melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing, Portoroz, SLO, September 18-20, 2018, 327–330, Research Publishing. doi:10.3850/978-981-11-2728-1_57
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing, Portoroz, SLO, September 18-20, 2018, 327–330, Research Publishing. doi:10.3850/978-981-11-2728-1_57
A study of the factors influencing generated surface roughness of downfacing surfaces in selective laser melting
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018
Charles, A. P.; Elkaseer, A.; Müller, T.; Thijs, L.; Torge, M.; Hagenmeyer, V.; Scholz, S.
2018. World Congress on Micro and Nano Manufacturing (WCMNM 2018 2018), Portorož, Slowenien, 17.–20. September 2018
Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. Proceedings of the 14th IEEE International Conference on Automation Science and Engineering (CASE), München, August 20-24, 2018, 1012–1017, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COASE.2018.8560405
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. Proceedings of the 14th IEEE International Conference on Automation Science and Engineering (CASE), München, August 20-24, 2018, 1012–1017, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/COASE.2018.8560405
Smart modular reconfigurable fully-digital manufacturing system with a knowledge-based framework: example of a fabrication of microfluidic chips
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), München, Deutschland, 20.–24. August 2018
Scholz, S.; Elkaseer, A.; Müller, T.; Gengenbach, U.; Hagenmeyer, V.
2018. 14th IEEE International Conference on Automation Science and Engineering (CASE 2018), München, Deutschland, 20.–24. August 2018
Replication of Overmolded Orthopedic Implants with a Functionalized Thin Layer of Biodegradable Polymer
Elkaseer, A.; Mueller, T.; Azcarate, S.; Philipp-Pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Sampaio, D.; Hagenmeyer, V.; Scholz, S.
2018. Polymers, 10 (7), Article: 707. doi:10.3390/polym10070707
Elkaseer, A.; Mueller, T.; Azcarate, S.; Philipp-Pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Sampaio, D.; Hagenmeyer, V.; Scholz, S.
2018. Polymers, 10 (7), Article: 707. doi:10.3390/polym10070707
Approaches to a Practical Implementation of Industry 4.0
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. 11th International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rom, Italien, 25.–29. März 2018
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. 11th International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rom, Italien, 25.–29. März 2018
Approaches to a Practical Implementation of Industry 4.0
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. ACHI 2018 : 11th International Conference on Advances in Computer-Human Interactions, Roma, I, March 25-29, 2018. Ed.: B. Gersbeck-Schierholz, 141–146, International Academy, Research, and Industry Association (IARIA)
Elkaseer, A.; Salama, M.; Hazem, A.; Scholz, S.
2018. ACHI 2018 : 11th International Conference on Advances in Computer-Human Interactions, Roma, I, March 25-29, 2018. Ed.: B. Gersbeck-Schierholz, 141–146, International Academy, Research, and Industry Association (IARIA)
Data Science using the Shell
Schmidt, A.; Scholz, S.
2018. 20th International Conference on Enterprise Information Systems (ICEIS 2018), Funchal, Portugal, 21.–24. März 2018
Schmidt, A.; Scholz, S.
2018. 20th International Conference on Enterprise Information Systems (ICEIS 2018), Funchal, Portugal, 21.–24. März 2018
Quantitative Considerations about the Semantic Relationship of Entities in a Document Corpus
Schmidt, A.; Scholz, S.
2018. Proceedings of the 51st Hawaii International Conference on System Sciences, Hilton Waikoloa Village, Hawaii, January 2-6, 2018, 933–942
Schmidt, A.; Scholz, S.
2018. Proceedings of the 51st Hawaii International Conference on System Sciences, Hilton Waikoloa Village, Hawaii, January 2-6, 2018, 933–942
2017
Analysis of Process Parameters in the Production of Orthopedic Implants Combining Metal Injection Moulding and Polymer over Moulding
Scholz, S.; Sampaio, D.; Müller, T.; Philip-Picher, M.; Wilfinger, T.; Wittner, W.; Prantl, M.
2017. WCMNM 2017: 2017 World Congress on Micro and Nano Manufacturing - A Joint Conference of ICOMM/4M/IFMM, Kaohsiung, Taiwan, March 27-30, 2017
Scholz, S.; Sampaio, D.; Müller, T.; Philip-Picher, M.; Wilfinger, T.; Wittner, W.; Prantl, M.
2017. WCMNM 2017: 2017 World Congress on Micro and Nano Manufacturing - A Joint Conference of ICOMM/4M/IFMM, Kaohsiung, Taiwan, March 27-30, 2017
Additive manufacturing and relevant projects
Scholz, S.
2017. Universidade de Sao Paulo, Sao Paulo, BR, 26.Juli 2017
Scholz, S.
2017. Universidade de Sao Paulo, Sao Paulo, BR, 26.Juli 2017
Digital manufacturing and industry 4.0
Scholz, S.
2017. Universidade Estadual Paulista, Sao Paulo, BR, 28.Juli 2017
Scholz, S.
2017. Universidade Estadual Paulista, Sao Paulo, BR, 28.Juli 2017
An introduction into statistical computing with R
Schmidt, A.; Scholz, S. G.
2017. 7th International Conference on Internet Technologies and Applications, Wrexham, GB, September 12-15, 2017
Schmidt, A.; Scholz, S. G.
2017. 7th International Conference on Internet Technologies and Applications, Wrexham, GB, September 12-15, 2017
Novel nano links for additive manufacturing - is there a need for a safety risk management concept in 3D printing?
Scholz, S.; Nau, K.
2017. EuroNanoForum 2017, Valletta, Malta, June 21-23, 2017
Scholz, S.; Nau, K.
2017. EuroNanoForum 2017, Valletta, Malta, June 21-23, 2017
System integration of smart flexible multilayer printed systems
Koker, L.; Scholz, S.; Berntzen, L.; Abdelaziz, M.; Bernardini, S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Koker, L.; Scholz, S.; Berntzen, L.; Abdelaziz, M.; Bernardini, S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Data manipulation and data transformation using the Shell
Schmidt, A.; Scholz, S.
2017. The Ninth International Conference on Advances in Databases, Knowledge and Data Applications. DBKDA 2017. Barcelona, E, May 21-25, 2017
Schmidt, A.; Scholz, S.
2017. The Ninth International Conference on Advances in Databases, Knowledge and Data Applications. DBKDA 2017. Barcelona, E, May 21-25, 2017
Process and parameter optimisation for micro structuring of 3D freeform metallic surfaces: A comparative study of short-pulse (nanosecond) and ultrafast (picosecond, femtosecond) laser ablation
Scholz, S. G.; Sampaio, D. J. B. S.; Mangang, M.; Pfleging, W.
2017. Laser Resonators, Microresonators, and Beam Control XIX 2017, San Francisco, United States, 30. - 2. February, 2017, Art.Nr.: 100920E, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2252044
Scholz, S. G.; Sampaio, D. J. B. S.; Mangang, M.; Pfleging, W.
2017. Laser Resonators, Microresonators, and Beam Control XIX 2017, San Francisco, United States, 30. - 2. February, 2017, Art.Nr.: 100920E, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2252044
PANEL: Advances in computer-human interactions
Scholz, S. G.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017
Scholz, S. G.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017
Digital system integration in the context of industry 4.0
Scholz, S. G.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017
Scholz, S. G.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017
Process and parameter optimisation for micro structuring of 3d freeform metallic surfaces - a comparative study of short-pulse (nanosecond) and ultrafast (picosecond, femtosecond) laser ablation
Scholz, S. G.; Sampaio, D. J. B. S.; Mangang, M.; Pfleging, W.
2017. SPIE Photonics West, San Francisco, CA, January 28 - February 2, 2017
Scholz, S. G.; Sampaio, D. J. B. S.; Mangang, M.; Pfleging, W.
2017. SPIE Photonics West, San Francisco, CA, January 28 - February 2, 2017
Industry 4.0 and the futur revolution for human-centered industry
Brunet, A.; Scholz, S.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 154–157, International Academy, Research, and Industry Association (IARIA)
Brunet, A.; Scholz, S.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 154–157, International Academy, Research, and Industry Association (IARIA)
Nano inks for additive manufacturing - a safe-by-design-approach
Nau, K.; Müller, T.; Scholz, S. G.; Sampaio, D. J. B. S.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 212–214, International Academy, Research, and Industry Association (IARIA)
Nau, K.; Müller, T.; Scholz, S. G.; Sampaio, D. J. B. S.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 212–214, International Academy, Research, and Industry Association (IARIA)
Industry 4.0 human-oriented challenges using the example of additive manufacturing technologies
Sampaio, D. J. B. S.; Weber, M.-A.; Scholz, S. G.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 158–161, International Academy, Research, and Industry Association (IARIA)
Sampaio, D. J. B. S.; Weber, M.-A.; Scholz, S. G.
2017. ACHI 2017 : 10th International Conference on Advances in Compter-Human Interactions, Nice, F, March 19-23, 2017. Ed.: R. Oberhauser, 158–161, International Academy, Research, and Industry Association (IARIA)
Industry 4.0 and the futur revolution for human-centered industry
Brunet, A.; Scholz, S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Brunet, A.; Scholz, S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Nano inks for additive manufacturing - a safe-by-design-approach
Nau, K.; Müller, T.; Scholz, S. G.; Sampaio, D. J. B. S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Nau, K.; Müller, T.; Scholz, S. G.; Sampaio, D. J. B. S.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Industry 4.0 human-oriented challenges using the example of additive manufacturing technologies
Sampaio, D. J. B. S.; Weber, M.-A.; Scholz, S. G.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Sampaio, D. J. B. S.; Weber, M.-A.; Scholz, S. G.
2017. 10th International Conference on Advances in Computer-Human Interactions (ACHI 2017), Nizza, Frankreich, 19.–23. März 2017
Moulded Interconnect devices
Brunet, A.; Gengenbach, U.; Müller, T.; Scholz, S.; Dickerhof, M.
2017. Micro-Manufacturing Technologies and Their Applications : A Theoretical and Practical Guide. Ed.: I. Fassi, Springer International Publishing. doi:10.1007/978-3-319-39651-4_7
Brunet, A.; Gengenbach, U.; Müller, T.; Scholz, S.; Dickerhof, M.
2017. Micro-Manufacturing Technologies and Their Applications : A Theoretical and Practical Guide. Ed.: I. Fassi, Springer International Publishing. doi:10.1007/978-3-319-39651-4_7
Mikrofertigungstechnologien und ihre Anwendungen – ein theoretischer und praktischer Leitfaden
Brunet, A.; Müller, T.; Scholz, S.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000062009
Brunet, A.; Müller, T.; Scholz, S.
2017. KIT Scientific Publishing. doi:10.5445/KSP/1000062009
2016
High throughput polymer micro replication quality assurance using 3D optical high-speed metrology
Scholz, S.; Calaon, M.; Tosello, G.; Hansen, H.; Prantl, M.; Dessors, S.; Müller, T.; Miller, N.
2016. 16th International Conference of the European Society for Precision Engineering and Nanotechnology (2016), Nottingham, Vereinigtes Königreich, 30. Mai–3. Juni 2016
Scholz, S.; Calaon, M.; Tosello, G.; Hansen, H.; Prantl, M.; Dessors, S.; Müller, T.; Miller, N.
2016. 16th International Conference of the European Society for Precision Engineering and Nanotechnology (2016), Nottingham, Vereinigtes Königreich, 30. Mai–3. Juni 2016
Towards in process control of polymer injection moulded micro components
Calaon, M.; Tosello, G.; Hansen, H. N.; Prantl, M.; Dessors, S.; Mueller, T.; Scholz, S. G.; Miller, N.
2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, Nottingham, GB, May 30 - June 3, 2016. Ed.: P. Bointon, 455–456, European Society for Precision Engineering and Nanotechnology (euspen)
Calaon, M.; Tosello, G.; Hansen, H. N.; Prantl, M.; Dessors, S.; Mueller, T.; Scholz, S. G.; Miller, N.
2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, Nottingham, GB, May 30 - June 3, 2016. Ed.: P. Bointon, 455–456, European Society for Precision Engineering and Nanotechnology (euspen)
Additive Manufacturing für Elektronik-Komponenten
Scholz, S.
2016. Von Losgröße 1 bis Serienfertigung – 3D Druck in Maschinenbau, Elektronik und Life Sciences, KIT-Business-Club , Karlsruhe, 16.November 2016
Scholz, S.
2016. Von Losgröße 1 bis Serienfertigung – 3D Druck in Maschinenbau, Elektronik und Life Sciences, KIT-Business-Club , Karlsruhe, 16.November 2016
Combining metal injection moulding and polymer over moulding for the production of orthopaedic implants
Müller, T.; Santos Machado, L.; Philipp-pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Scholz, S. G.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, Research Publishing. doi:10.3850/978-981-11-0749-8_742
Müller, T.; Santos Machado, L.; Philipp-pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Scholz, S. G.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, Research Publishing. doi:10.3850/978-981-11-0749-8_742
Combining metal injection moulding and polymer over moulding for the production of orthopaedic implants
Müller, T.; Santos Machado, L.; Philipp-pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Scholz, S. G.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016
Müller, T.; Santos Machado, L.; Philipp-pichler, M.; Wilfinger, T.; Wittner, W.; Prantl, M.; Scholz, S. G.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016
Process optimization for injection moulding of passive microwave compounds
Scholz, S. G.; Mueller, T.; Santos Machado, L.; Calaon, M.; Tosello, G.; Dessors, S.; Pranti, M.; Miller, N.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016
Scholz, S. G.; Mueller, T.; Santos Machado, L.; Calaon, M.; Tosello, G.; Dessors, S.; Pranti, M.; Miller, N.
2016. 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016
Process optimization for injection moulding of passive microwave compounds
Scholz, S. G.; Mueller, T.; Santos Machado, L.; Calaon, M.; Tosello, G.; Dessors, S.; Pranti, M.; Miller, N.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, Research Publishing. doi:10.3850/978-981-11-0749-8_743
Scholz, S. G.; Mueller, T.; Santos Machado, L.; Calaon, M.; Tosello, G.; Dessors, S.; Pranti, M.; Miller, N.
2016. Proceedings of the 4M/IWMF2016 Conference, Lyngby, DK, September 13-15, 2016. Ed.: G. Tosello, Research Publishing. doi:10.3850/978-981-11-0749-8_743
Requirements for 3D printed applications using novel nanoparticle enhanced digital materials
Brunet, A.; Müller, T.; Scholz, S.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 31–34, International Academy, Research, and Industry Association (IARIA)
Brunet, A.; Müller, T.; Scholz, S.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 31–34, International Academy, Research, and Industry Association (IARIA)
Requirements for 3D printed applications using novel nanoparticle enhanced digital materials
Brunet, A.; Müller, T.; Scholz, S.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Brunet, A.; Müller, T.; Scholz, S.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Novel nanoparticle enhanced digital materials for 3D printing and their application shown for the robotic and electronic industry
Scholz, S.; Brunet, A.; Müller, T.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Scholz, S.; Brunet, A.; Müller, T.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Novel nanoparticle enhanced digital materials for 3D printing and their application shown for the robotic and electronic industry
Scholz, S.; Brunet, A.; Müller, T.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 27–30, International Academy, Research, and Industry Association (IARIA)
Scholz, S.; Brunet, A.; Müller, T.; Fuchsbauer, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 27–30, International Academy, Research, and Industry Association (IARIA)
Keynote: Industry 4.0
Scholz, S. G.
2016. 12th International Conference on Networking and Services (ICNS), Lisboa, P, June 26-30, 2016
Scholz, S. G.
2016. 12th International Conference on Networking and Services (ICNS), Lisboa, P, June 26-30, 2016
(Self)control of energy systems: Challenges and optimization
Scholz, S. G.
2016. 12th International Conference on Networking and Services (ICNS), Lisboa, P, June 26-30, 2016
Scholz, S. G.
2016. 12th International Conference on Networking and Services (ICNS), Lisboa, P, June 26-30, 2016
Society progress and quantum technology: Quo vadis?
Scholz, S. G.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Scholz, S. G.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Application driven advances in additive manufacturing
Scholz, S.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Scholz, S.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
A cost model for SMARTLAM
Dobler, M.; Gourlay, J.; Scholz, S.; Schmidt, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 16–21, International Academy, Research, and Industry Association (IARIA)
Dobler, M.; Gourlay, J.; Scholz, S.; Schmidt, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016. Ed.: S.G. Scholz, 16–21, International Academy, Research, and Industry Association (IARIA)
A cost model for SMARTLAM
Dobler, M.; Gourlay, J.; Scholz, S.; Schmidt, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
Dobler, M.; Gourlay, J.; Scholz, S.; Schmidt, A.
2016. 9th International Conference on Advances in Circuits, Electronics and Micro-electronics (CENICS 2016), Nice, F, July 24-28, 2016
An introduction into statistical computing and natural language processing with R
Schmidt, A.; Scholz, S.
2016. 8th International Conference on Advances in Databases, Knowledge, and Data Applications, DBKDA 2016, Lisbon, P, June 26-30, 2016
Schmidt, A.; Scholz, S.
2016. 8th International Conference on Advances in Databases, Knowledge, and Data Applications, DBKDA 2016, Lisbon, P, June 26-30, 2016
Novel nano inks for additive manufacturing. Establishing nano safety risk management concepts in 3D printing
Scholz, S.; Nau, K.
2016. 8th International Nanotoxicology Congress (nanoTOX 2016), Boston, MA, June 1-4, 2016
Scholz, S.; Nau, K.
2016. 8th International Nanotoxicology Congress (nanoTOX 2016), Boston, MA, June 1-4, 2016
Detection and visual inspection of highly obfuscated plagiarisms
Schmidt, A.; Bühler, S.; Senger, R.; Scholz, S.; Dickerhof, M.
2016. Proceedings of the 49th Annual Hawaii International Conference on System Sciences (HICSS-49), Kauai, Hawaii, January 5-8, 2016. Ed.: T.X. Bui, 4113–4122, IEEE Computer Society. doi:10.1109/HICSS.2016.510
Schmidt, A.; Bühler, S.; Senger, R.; Scholz, S.; Dickerhof, M.
2016. Proceedings of the 49th Annual Hawaii International Conference on System Sciences (HICSS-49), Kauai, Hawaii, January 5-8, 2016. Ed.: T.X. Bui, 4113–4122, IEEE Computer Society. doi:10.1109/HICSS.2016.510
Detection and visual inspection of highly obfuscated plagiarisms
Schmidt, A.; Bühler, S.; Senger, R.; Scholz, S.; Dickerhof, M.
2016. 49th Hawaii International Conference on System Sciences (HICSS-49), Kauai, Hawaii, January 5-8, 2016
Schmidt, A.; Bühler, S.; Senger, R.; Scholz, S.; Dickerhof, M.
2016. 49th Hawaii International Conference on System Sciences (HICSS-49), Kauai, Hawaii, January 5-8, 2016
A modular flexible scalable and reconfigurable system for manufacturing of Microsystems based on additive manufacturing and e-printing
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Adamietz, R.; Iseringhausen, T.; Kimmig, D.; Dickerhof, M.; Woegerer, C.
2016. Robotics and computer integrated manufacturing, 40, 14–23. doi:10.1016/j.rcim.2015.12.006
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Adamietz, R.; Iseringhausen, T.; Kimmig, D.; Dickerhof, M.; Woegerer, C.
2016. Robotics and computer integrated manufacturing, 40, 14–23. doi:10.1016/j.rcim.2015.12.006
2015
Characterisation of demoulding parameters in micro-injection moulding
Griffiths, C. A.; Tosello, G.; Dimov, S. S.; Scholz, S. G.; Rees, A.; Whiteside, B.
2015. Microsystem technologies, 21 (8), 1677–1690. doi:10.1007/s00542-014-2269-6
Griffiths, C. A.; Tosello, G.; Dimov, S. S.; Scholz, S. G.; Rees, A.; Whiteside, B.
2015. Microsystem technologies, 21 (8), 1677–1690. doi:10.1007/s00542-014-2269-6
SMARTLAM - ein hochgestecktes Ziel
Scholz, S.
2015. MicroTec Südwest, 8.Fachgruppensitzung Drucktechnologien, Freudenstadt, 24.November 2015
Scholz, S.
2015. MicroTec Südwest, 8.Fachgruppensitzung Drucktechnologien, Freudenstadt, 24.November 2015
SMARTLAM - ein modulares, flexibles, skalierbares und konfigurierbares System für die Herstellung von Mikrosystemen
Scholz, S.
2015. Vortr.: IHK Haus der Wirtschaft, Karlsruhe, 17.November 2015
Scholz, S.
2015. Vortr.: IHK Haus der Wirtschaft, Karlsruhe, 17.November 2015
SMARTLAM - A modular, flexible, scalable, and reconfigurable system for manufacturing of microsystems
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Iseringhausen, T.; Dickerhof, M.; Schmidt, A.; Woegener, C.
2015. 4th International Conference on Intelligent Systems and Applications (INTELLI 2015), St.Julians, Malta, October 11-16, 2015
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Iseringhausen, T.; Dickerhof, M.; Schmidt, A.; Woegener, C.
2015. 4th International Conference on Intelligent Systems and Applications (INTELLI 2015), St.Julians, Malta, October 11-16, 2015
SMARTLAM - A modular, flexible, scalable, and reconfigurable system for manufacturing of microsystems
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Iseringhausen, T.; Dickerhof, M.; Schmidt, A.; Woegener, C.
2015. INTELLI 2015 : 4th International Conference on Intelligent Systems and Applications, St.Julians, Malta, October 11-16, 2015 . Ed.: I. Schwab, 140–141, International Academy, Research, and Industry Association (IARIA)
Scholz, S.; Mueller, T.; Plasch, M.; Limbeck, H.; Iseringhausen, T.; Dickerhof, M.; Schmidt, A.; Woegener, C.
2015. INTELLI 2015 : 4th International Conference on Intelligent Systems and Applications, St.Julians, Malta, October 11-16, 2015 . Ed.: I. Schwab, 140–141, International Academy, Research, and Industry Association (IARIA)
H2FC sage framework - Crowdsourcing in the hydrogen and fuel cells community
Bittner, K.; Brenner, T.; Scholz, S.; Jordan, T.
2015. European Technical School on Hydrogen and Fuel Cells (2015), Iraklio, Griechenland, 22.–26. Juni 2015
Bittner, K.; Brenner, T.; Scholz, S.; Jordan, T.
2015. European Technical School on Hydrogen and Fuel Cells (2015), Iraklio, Griechenland, 22.–26. Juni 2015
2014
Implementation variants for position lists
Schmidt, A.; Kimmig, D.; Scholz, S.
2014. International Journal on Advances in Software[[Elektronische Ressource]], 7, 391–401
Schmidt, A.; Kimmig, D.; Scholz, S.
2014. International Journal on Advances in Software[[Elektronische Ressource]], 7, 391–401
A modular flexible scalable and reconfigurable system for manufacturing of microsystems based on additive manufacturing and E-printing
Woegerer, C.; Plasch, M.; Heidl, W.; Dickerhof, M.; Kimmig, D.; Scholz, S.; Adamietz, R.; Iseringhausen, T.
2014. 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2014), San Antonio, Tex., May 20-23, 2014
Woegerer, C.; Plasch, M.; Heidl, W.; Dickerhof, M.; Kimmig, D.; Scholz, S.; Adamietz, R.; Iseringhausen, T.
2014. 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2014), San Antonio, Tex., May 20-23, 2014
A modular flexible scalable and reconfigurable system for manufacturing of microsystems based on additive manufacturing and E-printing
Woegerer, C.; Plasch, M.; Heidl, W.; Dickerhof, M.; Kimmig, D.; Scholz, S.; Adamietz, R.; Iseringhausen, T.
2014. Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2014), San Antonio, TX., May 20-23, 2014. Ed.: F. F., 811–816, DEStech Publications
Woegerer, C.; Plasch, M.; Heidl, W.; Dickerhof, M.; Kimmig, D.; Scholz, S.; Adamietz, R.; Iseringhausen, T.
2014. Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2014), San Antonio, TX., May 20-23, 2014. Ed.: F. F., 811–816, DEStech Publications
A concept for plagiarism detection based on compressed bitmaps
Schmidt, A.; Becker, R.; Kimmig, D.; Senger, R.; Scholz, S.
2014. 6th International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2014), Chamonix, F, April 20-24, 2014
Schmidt, A.; Becker, R.; Kimmig, D.; Senger, R.; Scholz, S.
2014. 6th International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2014), Chamonix, F, April 20-24, 2014
A concept for plagiarism detection based on compressed bitmaps
Schmidt, A.; Becker, R.; Kimmig, D.; Senger, R.; Scholz, S.
2014. DBKDA 2014 : 6th International Conference on Advances in Databases, Knowledge, and Data Applications, Chamonix, F, April 20-24, 2014. Ed.: F. Laux, 30–34, International Academy, Research, and Industry Association (IARIA)
Schmidt, A.; Becker, R.; Kimmig, D.; Senger, R.; Scholz, S.
2014. DBKDA 2014 : 6th International Conference on Advances in Databases, Knowledge, and Data Applications, Chamonix, F, April 20-24, 2014. Ed.: F. Laux, 30–34, International Academy, Research, and Industry Association (IARIA)
2013
A ranking algrithm for the detection of composite concepts based on multiple taxonomies
Kimmig, D.; Scholz, S.; Schmidt, A.
2013. 3rd International Conference on Advances in Information Mining and Management, Lisboa, P, November 17-23, 2013
Kimmig, D.; Scholz, S.; Schmidt, A.
2013. 3rd International Conference on Advances in Information Mining and Management, Lisboa, P, November 17-23, 2013
Scalable manufacturing equipment for production of mechatronic microsystems based on polymer film, laser milling and e-ink printing
Scholz, S.; Dickerhof, M.
2013. International Symposium ’NILindustrialday’, Salzburg, A, March 14-16, 2013
Scholz, S.; Dickerhof, M.
2013. International Symposium ’NILindustrialday’, Salzburg, A, March 14-16, 2013
A ranking algrithm for the detection of composite concepts based on multiple taxonomies
Kimmig, D.; Scholz, S.; Schmidt, A.
2013. IMMM 2013 : The 3rd International Conference on Advances in Information Mining and Management, Lisboa, P, November 17-23, 2013, 72–75, International Academy, Research, and Industry Association (IARIA)
Kimmig, D.; Scholz, S.; Schmidt, A.
2013. IMMM 2013 : The 3rd International Conference on Advances in Information Mining and Management, Lisboa, P, November 17-23, 2013, 72–75, International Academy, Research, and Industry Association (IARIA)
An additive manufacturing and e-printing based approach for flexible scalable manufacturing of microsystems
Dickerhof, M.; Kimmig, D.; Scholz, S.; Woegener, C.; Adamietz, R.; Pfleging, W.
2013. 10th Internat.Conf.on Multi-Material Micro Manufacture (4M 2013), San Sebastian, E, October 8-10, 2013
Dickerhof, M.; Kimmig, D.; Scholz, S.; Woegener, C.; Adamietz, R.; Pfleging, W.
2013. 10th Internat.Conf.on Multi-Material Micro Manufacture (4M 2013), San Sebastian, E, October 8-10, 2013
An additive manufacturing and e-printing based approach for flexible scalable manufacturing of microsystems
Dickerhof, M.; Kimmig, D.; Scholz, S.; Woegener, C.; Adamietz, R.; Pfleging, W.
2013. 4M 2013, 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, S, October 8-10, 2013. Ed.: S. Azcarate, 288–291, Research Publishing
Dickerhof, M.; Kimmig, D.; Scholz, S.; Woegener, C.; Adamietz, R.; Pfleging, W.
2013. 4M 2013, 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, S, October 8-10, 2013. Ed.: S. Azcarate, 288–291, Research Publishing
Workflow integration into information systems for business processes of European collaborative projects
Bittner, K.; Kimmig, D.; Warlo, I.; Scholz, S.
2013. IADIS Internat.Conf.Information Systems 2013, Lisboa, P, March 13-15, 2013
Bittner, K.; Kimmig, D.; Warlo, I.; Scholz, S.
2013. IADIS Internat.Conf.Information Systems 2013, Lisboa, P, March 13-15, 2013
Workflow integration into information systems for business processes of European collaborative projects
Bittner, K.; Kimmig, D.; Warlo, I.; Scholz, S.
2013. IADIS International Conference Information Systems 2013, Lisboa, P, March 13-15, 2013. Ed.: M. B. Nunes, 261–266, IADIS Press
Bittner, K.; Kimmig, D.; Warlo, I.; Scholz, S.
2013. IADIS International Conference Information Systems 2013, Lisboa, P, March 13-15, 2013. Ed.: M. B. Nunes, 261–266, IADIS Press
2012
Transparent High Aspect Ratio Replication using Two-Component Hot Embossing
Kolew, A.; Heilig, M.; Schneider, M.; Münch, D.; Scholz, S.; Petkov, P.; Worgull, M.
2012. 9th International Conference on Multi-Material Micro Manufacture, Wien, Österreich, October 9-11, 2012. Ed.: H. Noll, 254–257, Research Publishing. doi:10.3850/978-981-07-3353-7_327
Kolew, A.; Heilig, M.; Schneider, M.; Münch, D.; Scholz, S.; Petkov, P.; Worgull, M.
2012. 9th International Conference on Multi-Material Micro Manufacture, Wien, Österreich, October 9-11, 2012. Ed.: H. Noll, 254–257, Research Publishing. doi:10.3850/978-981-07-3353-7_327
Transparent high aspect ratio replication using two-component hot embossing
Kolew, A.; Heilig, M.; Schneider, M.; Münch, D.; Scholz, S.; Petkov, P.; Worgull, M.
2012. 9th Internat.Conf.on Multi-Material Micro Manufacture (4M 2012), Wien, A, October 9-11, 2012
Kolew, A.; Heilig, M.; Schneider, M.; Münch, D.; Scholz, S.; Petkov, P.; Worgull, M.
2012. 9th Internat.Conf.on Multi-Material Micro Manufacture (4M 2012), Wien, A, October 9-11, 2012
Nanosecond and picosecond laser structuring of electrode materials for lithium-ion batteries
Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Scholz, S.; Dobrev, T.; Ulrich, S.; Pfleging, W.
2012. Materials Research Society Fall Meeting, Boston, Mass., November 28 - December 2, 2011
Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Scholz, S.; Dobrev, T.; Ulrich, S.; Pfleging, W.
2012. Materials Research Society Fall Meeting, Boston, Mass., November 28 - December 2, 2011
Nanosecond and picosecond laser structuring of electrode materials for lithium-ion batteries
Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Scholz, S.; Dobrev, T.; Ulrich, S.; Pfleging, W.
2012. Mobile Energy : Proc. of Symp. F of MRS Fall Meeting 2011, Boston, Mass., November 28 - December 2, 2011, mrsf11–1388-f08, MRS. doi:10.1557/opl.2012.1174
Kohler, R.; Proell, J.; Besser, H.; Torge, M.; Scholz, S.; Dobrev, T.; Ulrich, S.; Pfleging, W.
2012. Mobile Energy : Proc. of Symp. F of MRS Fall Meeting 2011, Boston, Mass., November 28 - December 2, 2011, mrsf11–1388-f08, MRS. doi:10.1557/opl.2012.1174
2011
Transcriptional response of Zebrafish embryos exposed to neurotoxic compounds reveals a muscle activity dependent hspb11 expression
Klüver, N.; Yang, L.; Busch, W.; Scheffler, K.; Renner, P.; Strähle, U.; Scholz, S.
2011. PLoS one, 6, e29063. doi:10.1371/journal.pone.0029063
Klüver, N.; Yang, L.; Busch, W.; Scheffler, K.; Renner, P.; Strähle, U.; Scholz, S.
2011. PLoS one, 6, e29063. doi:10.1371/journal.pone.0029063
Laser-assisted surface engineering of thin film electrode materias for lithium-ion batteries
Pfleging, W.; Kohler, R.; Scholz, S.; Ziebert, C.; Proell, J.
2011. Lu, Y. [Hrsg.] Laser-Material Interactions at Micro/Nanoscales : Proc.of Symp.TT of MRS Spring Meeting 2011, San Francisco, Calif., April 25-29, 2011 Warrendale, Pa. : MRS, 2011 mrss11-1365-tt05-02 (Materials Research Society Symposium Proceedings ; 1365). doi:10.1557/opl.2011.1317
Pfleging, W.; Kohler, R.; Scholz, S.; Ziebert, C.; Proell, J.
2011. Lu, Y. [Hrsg.] Laser-Material Interactions at Micro/Nanoscales : Proc.of Symp.TT of MRS Spring Meeting 2011, San Francisco, Calif., April 25-29, 2011 Warrendale, Pa. : MRS, 2011 mrss11-1365-tt05-02 (Materials Research Society Symposium Proceedings ; 1365). doi:10.1557/opl.2011.1317
2009
Facilitating open innovation in micro and nano technology by providing open access to a pan-European toolbox called EUMINAfab
Kautt, M.; Anson, S. M.; Saile, V.; Scholz, S.; Fugier, P.; Lambertini, V.; Abad, E.; Dirne, F.; Loeschner, H.; Leach, R. K.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23- 25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online
Kautt, M.; Anson, S. M.; Saile, V.; Scholz, S.; Fugier, P.; Lambertini, V.; Abad, E.; Dirne, F.; Loeschner, H.; Leach, R. K.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23- 25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online
Facilitating open innovation in micro and nano technology by providing open access to a pan-European toolbox called EUMINAfab
Kautt, M.; Anson, S. M.; Saile, V.; Scholz, S.; Fugier, P.; Lambertini, V.; Abad, E.; Dirne, F.; Loeschner, H.; Leach, R. K.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23- 25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online, 11–24
Kautt, M.; Anson, S. M.; Saile, V.; Scholz, S.; Fugier, P.; Lambertini, V.; Abad, E.; Dirne, F.; Loeschner, H.; Leach, R. K.
2009. Saile, V. [Hrsg.] 4M/ICOMM 2009 : The Global Conf.on Micro Manufacture, Karlsruhe, September 23- 25, 2009 London : Professional Engineering Publ., 2009 Engineering Conferences Online, 11–24